|
|
Build Your Online Product Catalogs?
| Product Name: |
PPS 1140 White
|
| Supply Ability: |
300 |
| Related proudcts |
pps, |
| Specifications |
PPS 1140 White |
| Price Term: |
FOB |
| Port of loading: |
Ningbo port or Shanghai port |
| Minimum Order |
1T |
| Unit Price: |
35,000yuan/ton |
|
聚苯硫醚PPS 1140 白色
我们长期供应各色聚苯硫醚PPS 1140 白色、棕色、黑色，也要按客户的要求定做。PPS具有高刚性、低翘曲、收缩率低、各向异性低、与菲利普斯同规格比较强度更高，成本能大幅下降。聚苯硫醚（PPS）是以塑代“铜”“钢”“锌”的首选新型钢性塑料，成本是金属材料的四分之一。
聚苯硫醚（PPS）是含硫芳香族聚合物，它是一种高耐热的工程塑料，其熔点超过280度，热变形温度260度左右，可在220-240度的工作温度下长期使用。在400-500度的空气和氮气中仍稳定，铰链后可耐600度以上高温。自身具有阻燃性，可达到UL94-0级，无需加入阻燃剂。PPS机械性能好：其刚性极强，表面硬度高，并具有优异的耐蠕变性和耐疲劳性，耐化学性药物性能优异：目前尚未发现在200度以下溶解PPS的溶剂，对无机酸、碱和盐类的抵抗性极强。尺寸稳定性好：成型收缩率低，小于0.0025%，吸水率小于0.05%，线性热膨胀系数也小，在高温、低温条件下仍表现出良好的尺寸稳定性，故在机械、化工、仪器、仪表和航空、等各方面都具有广泛用途。PPS电性能优、耐磨性突出、而且耐辐射。加工性能好：PPS树脂的熔体黏度低，流动性好，极易与玻纤润湿接触，因此填充填料容易，用其制备的玻纤或无机填料增强注塑级粒料，具有极高抗伸缩性，抗冲击性，抗弯曲及延展性。可注塑、挤出、涂塑成型。一般用于机械方面为齿轮、机械配件、壳体、阀门，电器电子、汽车工业配件和宇航、航空等工业。
PPS polyphenylene sulfide
Our long-term supply colored polyphenylene sulfide PPS
High rigidity, low warpage, low shrinkage, low anisotropy, co***red with the intensity of the same size Phillips higher costs can be substantially reduced.
Polyphenylene sulfide (PPS) is a plastic generation "copper", "Steel", "zinc" steel of choice for new plastics, metal is one-fourth of the cost.
Polyphenylene sulfide (PPS) is a sulfur-containing aromatic polymer, it is a high heat-resistant plastic, more than 280 degrees of its melting point, heat distortion temperature of 260 degrees, 220-240 degrees in the long-term operating temperature use. 400-500 degrees in the air and nitrogen are still stable, hinge resistance after a high temperature above 600 degrees. Their flame retardant, can be achieved UL94-0 level, without adding flame retardants. PPS mecha |
| Company: |
Yuyao Plastics Co., Ltd. with Cheung
|
| Contact: |
Mr. yi xiong |
| Address: |
415 North Road, Yuyao City, New |
| Postcode: |
|
| Tel: |
13905848011 |
| Fax: |
86-0574-22689500 |
| E-mail: |
|
|
|
|
Home
